Podcasts by 301 Moved Permanently
CNC Router Tips Podcast is a show which answers one question from you, the listener about cnc router tables, cnc software, hardware, web hosting and business. We'll help you get started in your CNC hobby or business and help you CUT THROUGH THE CONFUSION. http://cncroutertips.com
Further podcasts by Bill Griggs
Podcast on the topic Technologie
All episodes
CentroidCNC Acorn Update from 2021-11-22T02:50:05
CENTROIDCNC ACORN UPDATE
CNC Router Tips Podcast Episode 65: CNCRT65
What is the CentroidCNC Acorn? The Acorn is a User Friendly, DIY CNC Control board for Milling Machines, L...
CNCRT64 CNC Router Tips Is Back from 2021-11-12T05:47:51
CNC ROUTER TIPS IS BACK
CNC Router Tips Podcast Episode 64
CNCRT64: CNC Router Tips Is Back
It has been a while but CNC Router Tips is back. In this episode we disc...
CNCRT63: CNC For Beginners with Mark Lindsay from 2019-08-10T05:16:47
CNC FOR BEGINNERS WITH MARK LINDSAY
CNC Router Tips Podcast Episode 63
CNCRT63: CNC For Beginners With Mark Lindsay
I think you will enjoy this episode of the CNC Router ...
CNCRT62: 30 Days Could Change Your Life from 2019-02-22T09:33:11
CNCRT62: 30 Days Could Change Your Life
CNC Router Tips Podcast Episode 62
Change doesn't have to take a long time. Bold action can be a shortcut to success. In this episode B...
CNCRT61: CNC Automation with Mike Gencarelli from 2018-12-15T02:16:24
CNCRT61: CNC Automation with Mike Gencarelli
CNC Router Tips Podcast Episode 61
IN this episode we talk with my friend Mike Gencarelli about CNC automation. Mike Gencarelli is...
CNCRT60: CNC Router Tips Podcast On Facebook Live from 2018-11-16T17:30:08
CNCRT60: CNC Router Tips Podcast On Face Book Live
CNC Router Tips Podcast Episode 60
For the 60th episode of the CNC RouterTips Podcast we broadcast on Facebook Live. This is...
CNCRT:59 What Is The Best Way To Learn CNC? from 2018-06-06T20:51:33
CNCRT59: What Is The Best Way To Learn CNC
CNC Router Tips Podcast Episode 59
In this episode of the CNC Router Tops Podcast, Bill Griggs answers a listener's question, "What ...
CNCRT58: Adventures in Work Holding from 2018-05-16T00:36:48
CNCRT 58: Adventures In Work Holding
CNC Router Tips Podcast Episode 58
Work holding is always an adventure for CNC Router Tables. In this episode of CNC Router Tips Bill Griggs tel...
CNCRT57: All About Limits from 2018-03-11T03:47:36
CNCRT 57: All About Limits
CNC Router Tips Podcast Episode 57
It's all about limits. No really limits are what keeps chaos at bay on our CNC Router tables. In this episode of...
CNCRT56: When Should I Buy A CNC Router Table from 2018-02-18T03:11:28
CNCRT 56: CNC ANSWERS
CNC Router Tips Podcast Episode 56
Bill Griggs answers a listener's question, "When Should I Buy A CNC Router Table? Before or after I retire?" Should you Buy ...
CNCRT 55: CNC Answers from 2018-02-06T00:30
CNCRT 55: CNC ANSWERS
CNC Router Tips Podcast Episode 55
Bill Griggs discusses many of the questions asked by new members of the #CNC Router Tips Group on Facebook. In this episode ...
CNCRT 54: CentroidCNC Acorn DIY CNC Controller with Keith McCulloch from 2017-12-17T15:58:38
CNC Router Tips Podcast Episode 54
CNCRT 54: CENTROIDCNC ACORN DIY CNC CONTROLLER
with Keith McCulloch
Bill Griggs discusses the CentroidCNC new Acorn DIY CNC Controller...
CNCRT 53: WHAT CNC QUESTIONS YOU SHOULD ASK from 2017-11-02T16:56:36
What CNC Questions You Should Ask.
CAN YOUR REALLY CREATE A CNC SIDE HUSTLE?
Bill Griggs shares what he has been up to lately in the workshop and around town. From High Schoo...
CNCRT 52: CNC Side Hustle with Chris Guillebeau from 2017-09-09T15:57:03
CNC Router Tips Podcast Episode 52
CNCRT 52: CNC SIDE HUSTLE WITH CHRIS GUILLEBEAU
From Idea to Income in 27 days.
Bill Griggs talks with New Your Times Best seller...
CNCRT 51: What's New In Vectric Aspire V9 from 2017-07-31T17:40:52
CNC Router Tips Podcast Episode 51
CNCRT 51: WHAT"S NEW IN VECTRIC ASPIRE V9?
Bill Griggs talks about what's new in Vectric Aspire V9. Vectric just released it's newest versi...
PBF025 Podcast Recording And Video Software from 2017-07-09T21:55:34
Podcast Recording And Video Software
By Bill Griggs and Kingsley Grant
Podcast By Friday Episode 25:
In this episode we discuss Podcast Recording and Video software. Wha...
CNCRT 50: CNCNUTZ WITH PETER PASSUELLO from 2017-07-07T00:00:38
CNCNUTZ WITH PETER PASSUELLO
CNC Router Tips Podcast Episode 50
CNCRT 50: CNCNUTZ WITH PETER PASSUELLO
CNC Youtube Content Creator
In this 50th episode of CNC Router...
CNCRT 49: AT IT AGAIN from 2017-06-03T02:00:50
CNC Router Tips Podcast Episode 49
CNCRT 49: AT IT AGAIN
Well we are at it again. We are answering your questions about CNC Router Tables and business. Catch up with Bill Grig...
CNCRT 48: Leasing CNC Equipment To Grow Your Business With Lucy Burke from 2017-03-28T06:52:54
CNC Router Tips Podcast Episode 48
CNCRT: 48 Leasing CNC Equipment To Grow Your Business With Lucy Burke
Leasing CNC Equipment To Grow Your Business is a valid strategy for fi...
CNCRT: 47B Visualize Your Perfect CNC Business With John Grimsmo from 2017-03-26T05:44:13
CNC Router Tips Podcast Episode 47B
CNCRT: 47B Visualize Your Perfect CNC Business With John Grimsmo.
We continue our chat with John Grimsmo, Custom Knife maker and Youtube Star. ...
CNCRT 47: Sharing And Growing A CNC Business On Youtube With John Grimsmo from 2017-03-19T21:58:10
CNC Router Tips Podcast Episode 47
CNCRT: 47
Sharing And Growing A CNC Business On Youtube With John Grimsmo.
John Grimsmo has been sharing and growing his CNC business On You...
CNCRT 46: When Your Home Based Business Needs Commercial Insurance from 2017-03-10T19:41:27
CNC Router Tips Podcast Episode 46
CNCRT 46: When Your Home Based Business Needs Commercial Insurance.
When your home based business needs commercial insurance you should tal...
CNCRT 45: Why I Bought A Tormach CNC Milling Machine from 2017-02-03T18:45:09
CNC Router Tips Podcast Episode 45
Why I Bought A Tormach CNC Milling Machine.
I just bought a Tormach CNC Milling machine. In this episode I discuss why I bought a Tormach CNC Mil...
CNCRT44: Build Your Own Makerspace from 2017-01-09T03:05:49
CNC Router Tips Podcast Episode 44
Build Your Own Makerspace with Mike Heidrick.
In the episode we talk with Mike Heidrick about why you should build your own makerspace. After try...
CNCRT43: Finding Your Audience With Bob Warfield. from 2016-12-26T00:10:14
CNC Router Tips Podcast Episode 43
Finding Your Audience With Bob Warfield.
Finding your audience is a key step before you design your product. Knowing what it is that your audienc...
CNCRT 42: What would Henry Do? Words of Wisdom From Henry Ford. from 2016-12-16T06:21:54
CNC Router Tips Podcast Episode 42
What would Henry Do? Words Of Wisdom From Henry Ford.
What would Henry Do? I ask myself this question whenever I have a tough decision to m...
CNCRT 41: How Much Should You Charge For CNC Work? from 2016-11-10T00:55:20
CNC Router Tips Podcast Episode 41
How Much Should You Charge For CNC Work?
How much should you charge for CNC Work? This question comes up all the time. We look at what the a...
CNCRT 40: Should You Buy Or Build A CNC Router from 2016-10-26T03:21:03
CNC Router Tips Podcast Episode 40
Should You Buy or Build A CNC Router?
Should you Buy a CNC Router Table or Build one? This question come up quite a bit and can have a variety of...
How To Set Native Units In Mach3 CNC Software from 2016-09-29T12:35:14
If you want your CNC Router table to uses inches or millimeters you will need to know how to set native units in mach3 cnc software.
I will show you how to easily change between millimet...
CNCRT: 39 How To Surface Your Spoil Board from 2016-09-09T16:30:05
CNC Router Tips Podcast Episode 39
How To Surface Your Spoil Board
One question that always pops up from beginners is how to surface your spoil board. In this edition of the CNC Rou...
CNCRT 38: Sienci Mill One Desktop CNC from 2016-08-30T15:47:23
CNC Router Tips Podcast Episode 38
Sienci Mill One Desktop CNC Mill
We take a look at the Sienci Labs Mill One, Desktop CNC Mill. Developed by two College students and offere...
CNCRT 37: First Look At Stepcraft 2-600 Desktop CNC Router from 2016-08-26T16:00:09
CNC Router Tips Podcast Episode 37
First Look Stepcraft 2 – 600
In this episode of the CNC Router Tips Podcast we take a first look at the Stepcraft 2 -600 desktop CNC Router Table.
Listen
CNCRT 36: Straight As A Rail from 2016-07-26T04:26:39
CNC Router Tips Podcast Episode 36
Straight As A Rail.
How To Align Linear Rails
CNC Router Tips Podcast looks at how to align your linear rails to make your CNC Router t...
CNCRT 35: What I Learned In Chicago. from 2016-07-15T11:30:38
CNC Router Tips Podcast Episode 35
What I Learned In Chicago.
Podcast Movement 2016
I took a trip to Chicago for the 2016 Podcast Movement Conference. While I was there I learn...
CNCRT 34: CNC Router Bit Starter Set from 2016-07-03T18:30:20
CNC Router Tips Podcast Episode 34
CNC Router Bit Starter Set.
In this episode we look at the best bits to have in your CNC Router Bits Starter Set. We look at what each types...
CNCRT 33: Comparing Six CNC Router Tables from 2016-06-26T22:35:47
CNC Router Tips Podcast Episode 33
Comparing Six CNC Router Tables.
In this episode we discuss and compare six different CNC Router Tables. We examine the question asked by ou...
CNCRT 32: IS IT OK TO USE OTHER PEOPLE'S WORK? from 2016-06-10T03:00:16
CNC Router Tips Podcast Episode 32
Is it OK to use other’s people’s work?
In this episode we discuss intellectual property and answer the question “ Is it OK to Use Other Peop...
CNCRT 31: What is A Variable Frequency Drive - VFD? from 2016-05-15T17:34:08
CNC Router Tips Podcast Episode 31.
What is a Variable Frequency Drive - VFD ?
In this episode we answer the question “What is a Variable Frequency Drive (VFD)”? We examine ho...
CNCRT 30: Looking Back At What Is Ahead from 2016-04-23T03:34:37
CNC Router Tips Podcast Episode 30
A LOOK BACK AT WHAT IS AHEAD
In this episode we take a look back at the previous episodes and where we have been in our CNC journey. Now we ...
CNCRT 29: Maker Jon Berard from 2016-03-28T14:30:08
CNC Router Tips Podcast Episode 29
Maker Jon Berard
In this episode we talk with Jon Berard, host of the Podcast for Makers about his mission to introduce young people to the ...
CNCRT 28: CNC Startup Circus with Jesse Hughson from 2016-03-16T18:40:53
CNC Startup Circus with Jesse Hughson
In this episode we talk with Jesse Hughson, Designer, Performer and Entrepreneur about his Circus equipment startup business Cyrcraft Customs.
Listen
CNCRT 27: Have You Met Ms. Jones? from 2016-02-24T04:55:39
CNC Router Tips Podcast Episode 27
Have you met Ms. Jones?
In this episode we speak with Melissa Jones, sign maker to the stars. Melissa explains how she and her husband built...
CNCRT 26: He built a YouTube following with CNC. from 2016-02-11T23:40:05
CNC Router Tips Podcast Episode 26
In this episode we speak with Dave Gatton of GarageworxCNC.com about his adventures in Youtube, and how he built a Youtube following with CNC. Dave tal...
CNCRT 25: He Gained By Giving. Part 2 from 2016-02-05T04:03:34
CNC Router Tips Podcast Episode 25
In this episode we hear the second part of our talk with Joe Cantrill of JoesCNC.com. Joe started out giving away free plans to his CNC Router Table an...
CNCRT 24: He Gave Away Free Plans And Gained So Much More. from 2016-02-02T21:19:14
CNC Router Tips Podcast Episode 24
Joe Cantrill - He Gave Away free Plans And Gained So Much More.
In this episode we talk with Joe Cantrill of JoesCNC.com. Joe started out gi...
CNCRT 23: Top CNC Router Table Plans from 2016-01-16T14:00:01
Top CNC Router Table Plans.
In this episode we discuss Michael DeAllessio’s question, What are the Top CNC Router Table Plans. Here are some of the most popular CNC Router table plans cu...
CNCRT 22: Four Things To Know Before you Buy a CNC Router from 2016-01-09T18:23:02
CNC Router Tips Podcast Episode 22
Four Things You Should know before you Buy a CNC Router.
In this episode we discuss the four things you should know before buying a CNC Router. We...
CNCRT 21: CNC Router Table Safety Tips. from 2015-12-23T23:51:14
CNC Router Tips Podcast Episode 21
CNC ROUTER SAFETY TIPS.
In this episode we discuss some basic safety considerations for new CNC Router Table Owners. Some basic safety equip...
CNCRT 20: How to use Toolpath Templates from 2015-12-12T16:23:49
CNC Router Tips Podcast Episode 20
HOW TO USE TOOLPATH TEMPLATES
Question: Steve asks: I have a VCarve Pro question. I’ve created a design and I am happy with the carved resu...
CNCRT 19: How to Merge Toolpaths from 2015-12-05T06:06:33
In this episode Chad asks: "I am new to VCarve Pro 8. I made a simple project with a few different elements and a different tool paths , but they all use the same bit. I’m wondering is there a wa...
Listen
CNCRT 18: How He Raised $510,497 With CNC Router Business from 2015-11-28T04:45:09
In this episode we talk with Erick Royer of Stepcraft.US about how he raised $510,497 with a CNC Router Table in 30 days with Kickstarter. Erick launched a new version of his companies CNC Router T...
Listen
CNCRT 17: Rebuilding - Helping - Giving- Receiving from 2015-11-20T06:49:24
CNC Router Tips Podcast Episode 17
In this episode we talk with Curt Hammond talks about Rebuilding his life. Helping others to achieve their goals. Giving his help to others and how he ...
CNCRT 16: Building Their Dream CNC Business Together from 2015-11-13T21:16:23
CNC Router Tips Podcast Episode 16
In this episode we talk with Johanna & Brian Haack of the Wood Grain Gallery. Johanna and Brian Haack decided to build a CNC Business together someday….. Wh...
CNCRT 15: Making Ends Meet with a CNC Router? from 2015-11-08T03:01:24
CNC Router Tips Podcast Episode 15
In this episode we talk with Lee Hanes Owner of Hanes Hot Rods. Lee Hanes was a Physical Therapist’s assistant when he suffered a career ending injury ...
CNCRT 14: Can You Build A Business With A CNC Router Table? from 2015-10-29T17:39:57
CNC Router Tips Podcast Episode 14
Question: Jeff asked: Quick question for those with a cnc, are you using it just for hobby or are you actually making money like a business? What thing...
CNCRT 13: Should I get a High Speed Spindle? from 2015-10-17T05:03:56
CNC Router Tips Podcast Episode 13
Question: Mark Slatem asks: Should I get a 2.2kw High Speed Spindle? I’m thinking of upgrading my spindle. I currently have a 400 watt spindle on a quite po...
CNCRT 12: What Does Vectric CNC Software Do? from 2015-10-10T00:48:44
CNC Router Tips Podcast episode 12
Question: Marlo Swedzinski Thank you Bill.
I first located you with the “CNC Router Tips Podcast”.
I am not really interested in verbally asking a ...
CNCRT 11: How to Set Up Constant Velocity Mode in Mach3 from 2015-09-30T06:20:35
CNC Router Tips Podcast Episode 11:
How To Set Up Constant Velocity Mode in MACH3.
Q: Bill, I got a question about setting your Mach3 acceleration and Velocity setting in Mach3. S...
CNCRT10: Building a Business&Family Around CNC Router Tables from 2015-09-17T17:00:40
CNCRT 10: Emmy award winning Videographer Sean Fairburn talks about building a business and family around CNC Router Tables. We discuss why it is important to share your adventures and trials with ...
Listen
CNCRT 09: How To Set Up Your Stepper Motors The Right Way in MACH3. from 2015-09-08T19:46:52
CNC Router Tips Podcast Episode 09:
How To Set Up Your Stepper Motors The Right Way in MACH3.
Q: Bill, I got a question about setting your Mach3 acceleration and Velocity se...
CNCRT 08: How to Use an XBox 360 Controller with Mach3 from 2015-09-03T19:02:17
CNC router tips podcast episode 08:
How To Use an Xbox 360 Controller with MACH3.
Q: I saw you using an Xbox controller in one of your video to operate their CNC. How did you do t...
CNCRT 07: How To Make Two Sided CNC Projects That Actually Line Up. from 2015-08-28T16:57:48
CNC router tips podcast episode 07:
How To Make Two Sided CNC Projects That Actually Line Up.
Q: Dylan asks: How do you make a two sided project that actually lines up?
Listen
CNCRT 06: How to add Draft to a 3D Model For Molding. from 2015-08-24T02:05:34
CNC router tips podcast episode 06:
How To Add Draft To A 3D Part For Molding
This is the CNC Router Tips podcast, a show which answers one question from you, the listener about ...
CNCRT 05: Triple Edge Finder Touch Off Plate from 2015-08-20T18:28:44
In this episode Phil asks: How do use the Triple Edge Finder to set XY&Z. How would it benefit me?
http://themakersguide.com
Listen
CNCRT 04: Air Cutting and how to avoid it. from 2015-08-14T06:11:53
Dan May asks: When cutting a pocket cut how do you get the second tool bit to start cutting at the same depth as the first tool left off without cutting air.
Steps
Create a new file
Listen
CNCRT 03: How to make CNC Signs in Cut2D from 2015-08-12T04:16:49
http://cncroutertips.com In this episode our listener John ask how to make CNC Signs in Vectric Cut2D software. This is a step by step descript...
Listen
CNCRT 02: Import 3D Models in Aspire from 2015-08-11T01:59:06
CNC Router Tips Podcast Episode 02:
In this episode our listener Phil asks: How do you import a 3D model in Aspire and change the size to match your material.
Videos:
<...
CNCRT 01: Where to Start from 2015-08-08T01:40:25
Jeff asks Where To Start learning about CNC Router Tables. We provide him a variety of resources and websites to help him cut through the confusion.
Resources mentions in the show.
...