Podcasts by Concrete Injection Made Easy
Tune in to the Concrete Injection Made Easy podcast, where your host Mateusz Furs shares his experience on injection technology and helps you get ahead of the curve with your business. Discover how to pick and adjust the right resin or pump to the job to get the best, watertight seal on cracks and expansion joints…and expand your customer base. Since 2010, Mateusz has worked in the concrete repair industry both as a product manager and as an owner-operator of contracting company in Warsaw, Poland. In 2017, he started a blog on injection technologies and water tightening solutions like curtains, horizontal and vertical insulation, selection of suitable grouts, pumps, and packers. In the podcast and on his blog, he talks about the injection technology in concrete, masonry, walls of concrete blocks, and stone as well as techniques for stopping groundwater outflow. He also dives into the principles of destruction by moisture and salts—and what can be done to prevent it. He shares his experience of soil stabilization, lifting concrete and making resin diaphragms in the ground, so that you can apply the same techniques in your business. It's a mix of solo shows and interviews from Mateusz, you're not going to want to miss. Hit subscribe and take your injection business to new heights.
Further podcasts by Mateusz Furs
Podcast on the topic Firmengründung
All episodes
Range of all injection applications #23 from 2021-05-20T22:00
This podcast episode will explain the wider applicability of fundamental injection rules around.
When I was learning injection, nothing helped me much as this broad view of the issue.
<... ListenThe commandment of need in the concrete injection industry based on The Millionaire Fastlane by M. J. DeMarco from 2021-05-06T21:00
#022 of the Concrete Injection Made Easy podcast
Making money in the concrete injection repair industry is far more than just drilling holes and injecting resin. There’s a lot you can d...
Concrete Injection Drilling Calculator from 2021-04-29T16:00
#021 Concrete Injection Made Easy podcast.
Today is a day with a lot of news. Note, I am giving away knowledge, just download it to automate your activity in the concrete repair industr...
Advantages of an Injection Test Field with Stephan Delarue from 2021-04-22T16:00
This is the 20th episode of Concrete Injection Made Easy.
You are just about to listen to the 20th episode of the Concrete Injection Made Easy podcast.
Today's topic see...
ListenTaking over the job site - crack re-injection from 2020-12-02T22:00
#018 od the Concrete Injection Made Easy
In the episode, I suggest what kind of information you should collect and then what to do to repair the leaking crack. I also mention the parame...
Forum on Injection Technology 2020+1 on the podcast from 2020-11-18T17:00
#017
Had it not been for Covid, everything would have gone as planned. The 2020 UEFA European Football Championship and Forum on Injection Technology (Forum Injektion Technik) would ta...
These 7 questions (and answers) will increase the effectiveness of remedial injection from 2020-11-05T01:00
Let me ask you a question. Do you want to earn more, have more time, develop your business, sleep well without thinking that there may be leakages somewhere caused by your mistakes?
This e...
ListenHow to seal the dilatation of the tank without entering it? from 2020-10-21T10:00
#015 How to seal the dilatation of the tank without entering it?
Where is a need, there is a solution.
And as we can see, the injection can be carried out even in the difficult cond...
Epoxy vs. Polyurethane Concrete Crack Injection - how to choose? from 2020-10-07T18:00
#014 episode of Concrete Injection Made Easy podcast.
And since it’s a concrete injection podcast, I have a question: what do we use most often on our job sites to inject into the crack...
Anton Vorek DESOI Koester Mabi on COVID, market, and the future of the injection industry from 2020-09-21T20:00
#013 The main message of the whole episode is the need to plan for the future in a positive way. There is and there will be different kinds of crises. So we need to be flexible and prepared for ...
ListenCrack Injection episode #012 Q&A 1st Webinar from 2020-09-09T20:00
The 12th episode of Concrete Injection Made Easy is a transcript of yesterday's webinar, which was a session of answering your questions.
I replied about why I insist on drilling smalle...
Taking the ‘Voodoo’ Out of Concrete Injection With Chris Coderre from SealBoss from 2020-08-25T20:00
#011 episode of Concrete Injection Made Easy podcast.
A big problem on job sites is that some concrete repair contractors aren’t methodical enough in applying proven processes and tech...
How a Growth Mindset Is Key to Boosting Your Concrete Injection Business from 2020-08-12T14:00
#010 of Concrete Injection Made Easy podcast.
Wow, what a milestone!
Today’s episode is especially interesting because it goes beyond a technical level and shows the importance of havi...
When Using Injection Rubber Is a Way Better Choice Than Acrylic Gel from 2020-07-29T08:00
#009 of Concrete Injection Made Easy Podcast.
One complaint I often hear from clients who have ordered concrete leak sealing procedures in which an acrylic gel was used is that under s...
Expand Your Leak Sealing Business Into Concrete Slab Lifting from 2020-07-13T15:00
#008 of Concrete Injection Made Easy podcast.
Maybe you’ve asked yourself the question, what does it take to get into a bigger part of the concrete injection game—namely lifting concrete sla...
Concrete injection training - Tradecc's Academy from 2020-06-27T13:00
# 007
Everyone agrees that the more you know, the better you perform. And that’s why in today’s episode I’ve decided to bring you two fantastic concrete injection repair specialists from Be...
Acrylic gels for leak-sealing and more with Brice Diochon at SNF from 2020-06-15T11:00
#006
In today’s episode of Concrete Injection Made Easy, everything you ever wanted to know about acrylic gels but were afraid to ask!
With Brice Diochon, Specialty Chemicals Manager ...
ListenConcrete motorway safety barriers from 2020-06-04T01:00
#005 Marten and I dive into the use of concrete barriers on motorways, as well as the dynamics of damage to concrete barriers due to corrosion of internal reinforcement and concrete degradation ...
ListenSealing Expansion Joints with Dennis Wagner of Normet from 2020-05-21T01:00
In today’s episode of Concrete Injection Made Easy, I discuss sealing expansion joints with my guest Dennis Wagner, Product Manager of Injection Products at Normet.
We explore a common pr...
ListenDecoding the PU based injection resins with Stephan Delarue from Webac from 2020-04-25T16:00
#003 From this episode, you will learn:
Why the PU foaming resins are not the only choice you have?
What are the differences between the polyurethane resins?
When to apply a fo...
ListenWhy the watertight business will not go away with Nick Chittenden from BASF from 2020-04-24T12:00
#002 You don't want to miss the episode with Nick Chittenden from Master Builders Solutions explaining how the injection technology may be an insurance policy.
From this episode ...
Concrete Injection Made Easy podcast - Introduction from 2020-04-23T09:00
#001 This is the brand new Concrete Injection Made Easy Podcast! The very first episode!!
If you are an engineer, designer, an applicator, an expert or a supplier of building materials ...
Concrete Injection Made Easy podcast - Introduction from 2020-04-23T09:00
#001 This is the brand new Concrete Injection Made Easy Podcast! The very first episode!!
If you are an engineer, designer, an applicator, an expert or a supplier of building materials ...
Concrete Injection Made Easy podcast - Introduction from 2020-04-23T09:00
#001 This is the brand new Concrete Injection Made Easy Podcast! The very first episode!!
If you are an engineer, designer, an applicator, an expert or a supplier of building materials ...